EUROTRONIK 6500
The EUROTRONIK 6500 series expands the proven control system Schlösser EUROTRONIK ESS with additional modules in a modular electronic housing for the mounting rail..
In combination with the modules of the EUROTRONIK 7500 series, safety levels up to SIL 3 or SIL 4 can be achieved.
All modules of the EUROTRONIK 6500 series are classified according to our fault assessment as SIL 2.
The required key figures and calculations can be provided to you if needed..
The control system is designed for mounting on a DIN rail, and the application-specific programming of this system is carried out through the wiring of the components.
By using the EURO-RAIL bus connector in the DIN rail TS35, the wiring effort is reduced, and it is possible to perform a collective reset via the EURO-RAIL BUS or to create a collective fault..
To increase availability, all assemblies can be used redundantly.
The system includes the following components
Logic modules
- AND assemblies
- OR- Assemblies
- LOCKING Assemblies
- timer-Construction Groups
Output modules
- Output amplifier with pre-logic
- Relay amplifier with pre-logic
Other assemblies
- Protection assemblies
- Diagnostic modules
Performance features of the system
- up to SIL 3 or SIL 4) Schlösser EUROTRONIK 7500 SIL 2 (in combination with components of the series
- Scalable Security
- Scalable Availability
- Integrated Diagnosis
- MTBF > 200 years
- Switching times from 3 ms to 10 ms
- For mounting of support rails